Skip to content
ISC Suspension – NA Logo
  • SHOP
  • PRODUCTS
    • ISC V2 N1 Coilovers
    • ISC V2 Basic Coilovers
    • ISC Camber Arms
    • ISC Toe Arms
    • Upgraded Coilover Springs
    • Wheel Spacers + Adapters
    • Air Piston Cup Kit
    • Triple S OEM Strut Springs
    • ISC Coilover Covers
    • Scratch & Dent Coilovers
  • RESOURCES
    • FAQs
    • Limited Lifetime Warranty
    • Application & Install Guides
    • Rebuild Service
    • Informative Articles
  • COMPANY
    • About ISC Suspension
    • ISC Team Gold
    • Project Cars
      • ISC 2015+ STi Project Car
      • ISC 2014 Forester XT
      • ISC Focus ST
      • ISC Nissan 350z Drift Car Project
      • ISC Subaru RSTI
      • ISC-BRZ 2015
      • ISC MK6 VW GTI
      • 2022 ISC Subaru BRZ
      • ISC BMW F30
      • 1972 Datsun 240Z
      • 2022 Ford Maverick
    • Sponsorships & Brand Ambassadors
    • Contact
  • NEWS + MEDIA
  • CART
ISC How To: Rear LCA Pillowball Greasing36creative2020-08-26T08:58:30-04:00

ISC How To: Rear LCA Pillowball Greasing

ISC How To: Rear LCA Pillowball Greasing

So, first things first, remove the 2 silver sections that sandwich the pillow ball and the street seal. Next thing you’re going to want to do is take your grease and get it up in there in the street seal. This grease is supplied so you can grease up that pillow ball. It’s easiest to just take the tube and squeeze and rotate around. Continue adding grease until the whole tube is gone then take a fresh tube and also do the same on the reverse side. It is recommended that you use at least one tube on each side if not more. And there you have it, that is how you are going to grease up the pillow ball bearing inside our control arms. The street seal combined with the grease is going to make sure that everything stays nice and lubricated and you’re not going to have any squeaks or any noises. If you hear any sort of squeaks and noises, you may want to double check and make sure there’s enough grease in there.

If you have any questions, call us at 603-715-9078.

Related Links

How to Remove Thrust Bearings – Video Transcript

ISC How To: Properly Adjusting Preload with ISC N1 Coilovers – Video Transcript

ISC How To: Adjusting the 19mm Top Nut

ISC How To: ISC 15/25mm Wheel Spacer OR Adapter

ISC How To: Damping Adjustment

ISC How To: Rear LCA Pillowball Greasing

ISC How To: Get Your Coilovers Ready for Winter

All Articles

Back to All Articles

Helpful Links

  • My Account
  • Warranty & Product Registration
  • Dealers
  • Policies

@isc_suspension

Follow ISC
© ISC Suspension-NA | All Rights Reserved
FacebookTwitterInstagramYouTube